AMPP

Asphalt Materials and Pavements Program

AMPP|Journal Articles

Journal Articles

Chris Williams

Journal articles at ISU (2006 to 2018)

  1. Robinette, C.J. (♦) and Williams, R.C. (50%), “The Effects of Testing History and Preparation Method on the Superpave Simple Performance Test,” Journal of the Association of Asphalt Paving Technologists, Volume 75, pp. 297-318, 2006.
  2. Robinette, C.J. (♦) and Williams, R.C. (50%), “Pavement Design Analysis Using the 2002 Design Guide Software,” Transportation Research Record: Journal of Transportation Research Board, 1970, Transportation Research Board of the National Academies, Washington, DC, pp. 143-150, 2006.
  3. Robinette, C.J. (♦) and Williams, R.C. (50%), “The Effects of Construction Variability on the Superpave Simple Performance Test”, Journal of ASTM International, Volume 3, Issue 8 (published online, 2006).
  4. ASTM Special Technical Publication 1469: Performance Tests for Hot Mix Asphalt (HMA) Including Fundamental and Empirical Procedures (Louay Mohammad, Editor), Williams, R.C. (75%); Hill, D.W. (♦); and Rottermond, M.P. (♦) “Utilization of an Asphalt Pavement Analyzer for Hot Mix Asphalt Laboratory Design”, pp. 16-40, American Society for Testing and Materials International, West Conshohocken, Pennsylvania, 2006. [This is a reprint of a journal article published in the Journal of ASTM International.]
  5. Williams, B.A. (♦); Williams, R.C. (40%); Bausano, J.P. (♦) “Permeability Criterion Test for Method Selection in Determining the Bulk Specific Gravity of Hot Mix Asphalt”, Journal of ASTM International, Volume 1, Issue 1, (published online, 2007).
  6. Kvasnak, A.N. (♦) and Williams, R.C. (50%), “Evaluation of the Interaction Effects between Asphalt Binders and Fillers,” Journal of the Association of Asphalt Paving Technologists, Volume 76, 163-200, 2007.
  7. McCready, N.S. (♦) and Williams, R.C. (50%), “The Utilization of Biofuel Co-Products as Performance Enhancers in Asphalt Binder,” Transportation Research Record: Journal of Transportation Research Board, 2051, Transportation Research Board of the National Academies, Washington, DC, pp. 8-14, 2008.
  8. Li, X. (●); Marasteanu, M.O.; Williams, R.C. (15%); and Clyne, T.R., “Effect of Reclaimed Asphalt Pavement (Type and Proportion) and Binder Grade on the Properties of Asphalt Mixtures” Transportation Research Record: Journal of Transportation Research Board, No. 2051, Transportation Research Board of the National Academies, Washington, DC, pp 90-97, 2008.
  9. Li, X. (●); Braham, A.F.; Marasteanu, M.O.; Buttlar, W.G.; and Williams, R.C. (15%), “Effect of Factors Affecting Fracture Energy of Asphalt Concrete at Low Temperatures,” International Journal of Road Materials and Pavement Design, Volume 9 Special Issue, pp. 243-268, 2008.
  10. Vitton, S.J.; Bausano, J.P. (♦); Williams, R.C. (20%); Schaefer, V.R., “Examination of Fine Aggregate Angularity Characteristics for Use in Hot Mix Asphalt Design Criteria,” International Journal of Road Materials and Pavement Design, Volume 9 Special Issue, pp. 397-416, 2008.
  11. Bausano, J.P. (♦); Williams, R.C. (50%), “Transitioning From AASHTO T283 to the Simple Performance Test Using Moisture Conditioning,” ASCE Journal of Materials in Civil Engineering, Vol. 2, No. 2, 73-82, February 2009.
  12. Mills-Beale, J.; You, Z.; Williams, R.C. (20%); and Dai, Q., “Determining the Specific Gravities of Coarse Aggregates in Michigan Utilizing Vacuum Saturation Approach,” Journal of Construction and Building Materials, Elsevier, Volume 23, Issue 3, Pages 1316-1322, March 2009.
  13. Mills-Beale, J.; You, Z.; Williams, R.C. (20%); and Dai, Q., “Measuring the Specific Gravities of Fine Aggregates in Michigan: An Automated Procedure,” International Journal of Pavement Research and Technology, Vol. 2, No. 2, 37-50, March 2009, ISSN 1996-6814.
  14. Li, X. (●); C. Williams (30%); Marasteanu, M.O.; Clyne, T.R.; Johnson E., “Investigation of In-Place Asphalt Film Thickness and Performance of Hot Mix Asphalt Mixtures,” ASCE Journal of Materials in Civil Engineering, Vol. 21, Issue 6, 262-270, June 2009.
  15. Breakah, T.M. (♦); Bausano, J.P. (♦); Williams, R.C. (30%), “Integration of Moisture Sensitivity Testing with Gyratory Mix Design and Mechanistic-Empirical Pavement Design,” ASCE Journal of Transportation Engineering, Vol. 135, Issue 11, 852-857, November, 2009, ISSN 0733-947X.
  16. Bausano, J.P. (♦) and C. Williams (50%), “Energy Based Approach to Calculating Flow Number,” ASTM Journal of Testing and Evaluation, Volume 38, Issue 1, pp. 1-8 (published online, 2010).
  17. Li, X. (●); Marasteanu, M.O.; Kvasnak, A.N. (♦); Bausano, J.P. (♦); Williams, R.C. (15%); Worel, B., “Factors Study in Low Temperature Fracture Resistance of Asphalt Concrete,” ASCE Journal of Materials in Civil Engineering, Volume 22, Issue 2, 145-152, February, 2010.
  18. Chen, D.; Jahren, C.T.; Lee, H.D.; Williams, R.C. (15%); Kim, S.; Heitzman, M., and Kim, J., “Effects of Recycled Materials on Long-Term Performance of Cold In-Place Recycled Asphalt Roads,” ASCE Journal of Performance of Constructed Facilities, Vol. 24, Issue 3, 275-280, May/June 2010.
  19. Abdel Raouf, M.A. (♦) and Williams, R.C. (50%), “General Rheological Properties of Fractionated Switchgrass Bio-oil as a Pavement Material”, International Journal of Road Materials and Pavement Design, Volume 11 Special Issue, pp. 325-353, 2010.
  20. Abdel Raouf, M.A. (♦) and Williams, R.C. (50%), “Temperature and Shear Susceptibility of a Non-Petroleum Binder as a Pavement Material”, Journal of the Transportation Research Board, No. 2180, Transportation Research Board of the National Academies, Washington, DC, pp. 9-18, 2010.
  21. Robinette, C.J. (♦); Breakah, T.M. (♦); Williams, R.C. (20%); and J.P. Bausano (♦), “Evaluation of the Variability of E* with Field Procured Hot Mix Asphalt”, International Journal of Road Materials and Pavement Design, Volume 11, Issue 3, pp. 559-582, October 2010.
  22. Abdel Raouf, M.A. (♦); Williams, R.C., “Rheology of Fractionated Cornstover Bio-oil as a Pavement Material”, International Journal of Pavements, Volume 9, pages 58-69, 2010.
  23. Li, X. (●); Marasteanu, M.O.; Labutz, J.; Williams, R.C. (15%), “Response Behavior of Asphalt Mixtures at Low Temperatures under Varying Indirect Tensile Test Loading Conditions,” ASTM Journal of Testing and Evaluation, Volume 39, Issue 4, pp 1-10, July, 2011.
  24. Goh, S.W.; You, Z.; Williams, R.C. (20%); and Li, X. (●), “Preliminary Dynamic Modulus Criteria of HMA for Field Rutting of Asphalt Pavements: Michigan’s Experience,” ASCE Journal of Transportation Engineering, Volume 137, Issue 1, pp. 37-45, January 2011.
  25. Breakah, T.M. (♦); Williams, R.C. (35%); Hertzmann, D.E.; and E.S. Takle, “Effects of Utilizing Accurate Climatic Conditions for Mechanistic-Empirical Pavement Design”, ASCE Journal of Transportation Engineering, Volume 137, Issue 1, pp. 84-90, January 2011.
  26. Breakah , T.M. (♦); Bausano, J.P. (♦); Williams, R.C. (25%); Vitton, S.J., “The Impact of Fine Aggregate Characteristics on Asphalt Concrete Pavement Design Life,” International Journal of Pavement Engineering, Volume 12, Issue 2, pp 101-109, 2011
  27. Cascione, A. (♦); Williams, R.C.; Buttlar, W.G.; Ahmed, S.; Hill, B.; Haugen, D.S.; Gillen, S., “Laboratory Evaluation of Field Produced Hot Mix Asphalt containing Post-Consumer Recycled Asphalt Shingles and Fractionated Recycled Asphalt Pavement”, Journal of the Association of Asphalt Paving Technologists, Volume 80, pp. 377-418, 2011.
  28. Li, X. (●); Williams, R.C., “A Practical Dynamic Modulus Test Protocol”, ASTM Journal of Testing and Evaluation, Volume 40, Issue 1, 7 pages, 2012.
  29. Yu, J. (♦); Williams, R.C.; Buss, A.F. (♦), “Laboratory Evaluation of Warm Mix Asphalt Influence on Theoretical Maximum Specific Gravity” ASTM Journal of Testing and Evaluation, Volume 40, Issue 4 (July 2012).
  30. Peralta; J. (♦); Hugo M.R.D.; Hilliou, L.; Machado, A.V.; Pais, J.; and Williams, R.C. “Mutual Changes in Bitumen and Rubber Related to the Production of Asphalt Rubber Binders”, Journal of Construction and Building Materials, Elsevier, Volume 36, pages 557-565, 2012.
  31. Peralta, J. (♦); Silva, H.M.R.D.; Williams, R.C.; Rover, M.; and Machado, A.V., 2013. Development of an Innovative Bio-Binder Using Asphalt-Rubber Technology. International Journal of Pavement Research and Technology, 6(4), pp.447-456.
  32. Chen, C. (♦); Williams, R.C.; Lee, D.; and Schram, S. “Quality control/quality assurance testing for longitudinal joint density and segregation of asphalt mixtures”, Journal of Construction and Building Materials, Elsevier, Volume 47, pages 80-85, 2013.
  33. Breakah, T. (♦) and Williams, R. “Dynamic testing of hot mix asphalt for moisture susceptibility assessment.” Journal of Construction and Building Materials, Volume 47, pages 636-642, 2013.
  34. Peralta, J. (♦); Hilliou, L.; Silva, H.; Williams, R.C.; Rover, M.; and Machado, A. “Rheological Changes in the Bitumen Caused by Heating and Interaction with Rubber during Asphalt-Rubber Production”, Rheologica Acta, Springer-Verlag, Volume 53, Issue 2, pages 143-157, 2014.
  35. Peralta, J. (♦); Williams, R.C.; Silva, H.; and Machado, A. “Recombination of Asphalt with Bio-Asphalt: Binder Formulation and Asphalt Mixtures Application”, Journal of the Association of Asphalt Paving Technologists, Volume 83, 2014.
  36. Schram, S.; Williams, R.C.; and Buss, A.F. (♦) “Evaluation of Bias in the Hamburg Wheel Tracking Device”, Journal of the Transportation Research Board, 2014.
  37. Chen, C. (♦) and Williams, R.C. “Water flow simulation and analysis in HMA microstructure”, Journal of Traffic and Transportation Engineering, Vol. 5, pages 362-370, 2014.
  38. Buss, A.F. (♦); Cascione, A. (♦); and Williams, R.C. “Evaluation of warm mix asphalt containing recycled asphalt shingles”, Journal of Construction and Building Materials, Elsevier, Volume 61, pages 1–9, 2014.
  39. Hernandez, N.; Williams, R.C.; and Cochran, E.W. “THE BATTLE FOR THE “GREEN” POLYMER. Different approaches for biopolymer synthesis: Bioadvantaged vs. Bioreplacement”, Journal of Organic & Biomolecular Chemistry, Royal Society of Chemistry, March 2014.
  40. Podolsky, J.H.(♦); and Williams, R.C. “Estimation and assessment of high temperature mix performance grade for select bio-based WMA additives”, Journal of Construction and Building Materials, Elsevier, Volume 69, pages 310-322, 2014.
  41. Buss, A.F.(♦); Williams, R.C.; and Schram, S. “The influence of warm mix asphalt on binders in mixes that contain recycled asphalt materials”, Journal of Construction and Building Materials, Volumer 77, pages 50-58, 2014.
  42. Podolsky, J.H. (♦); Buss, A.F. (♦); Williams, R.C.; and Cochran, E.W. “Comparative performance of bio-derived/chemical additives in warm mix asphalt at low temperature”, published online in Materials and Structures, December 2014, 1617/s11527-014-0520-3.
  43. Breakah, T.M. (♦) and Williams, R.C. “Stochastic finite element analysis of moisture damage in hot mix asphalt”, Materials and Structures, Volume 48, Issue 1-2, pages 93-106, January 2015.
  44. Chen, C. (♦); Williams, R.C.; Marasinghe, M.G.; Ashlock, J.C.; Schram, S. and Buss, A. (♦) “Assessment of Composite Pavement Performance by Survival Analysis”, ASCE Journal of Transportation Engineering, 1061/(ASCE)TE.1943-5436.0000784, 04015018, September 2015.
  45. Buss, A. (♦); Podolsky, J. (♦); Williams, R.C.; and Cochran, E.W. “Investigation of Isosorbide Distillation Bottoms as a Bio-Based Warm-Mix Additive”, ASCE Journal of Materials in Civil Engineering, 1061/(ASCE)MT.1943-5533.0001445 , 04015153, September 2015.
  46. Cascione, A.A. (♦); Williams, R.C.; and Yu, J. (♦) “Performance testing of asphalt pavements with recycled asphalt shingles from multiple field trials”, Journal of Construction and Building Materials, Volume 101, pages 628-642, December 2015.
  47. Buss, A. (), Williams, R.C.; and Schram, S. “The influence of warm mix asphalt on binders in mixes that contain recycled asphalt materials”, Journal of Construction and Building Materials, Volume 77, pages 50-58, February 2015.
  48. Yu, J. (♦), Jahren, C.T., and Williams, R.C. “Development of Holding Strategies for Deteriorated Low-Volume Roads: Introduction to Test Sections in Iowa”, Transportation Research Record: Journal of the Transportation Research Board, Volume 2474, pages 217-224, June 2015.
  49. Podolsky, J.H. (); Buss, A.F.; Williams, R.C.; and Cochran, E.W. “Comparative Performance of bio-derived/chemical Additives in Warm Mix Asphalt at Low Temperature,” Journal of Materials and Structures, volume 49 (1-2), pp. 563-575, 2016.
  50. Buss, A.F. (), Williams, R.C.; and Schram, S. “Evaluation of Moisture Susceptibility Tests for Warm Mix Asphalt”, Journal of Construction and Building Materials, Volume 102, pages 358-366, January 2016.
  51. Podolsky, J.H. (), Buss, A.F.; Williams, R.C.; and Cochran, E.W. “The Rutting and Stripping Resistance of Warm and Hot Mix Asphalt using Bio-additives”, Journal of Construction and Building Materials, volume 112, pages 128-139, June 2016.
  52. Lin, S.; Ashlock, J.A.; and Williams, R.C. “Nondestructive quality assessment of asphalt pavements based on dynamic modulus”. Journal of Construction and Building Materials, volume 112, pages 836-847, June 2016.
  53. Podolsky, J.H. (), Buss, A.F.; Williams, R.C.; and Cochran, E.W. “Effect of Bio-derived/Chemical Additives on Warm Mix Asphalt Compaction and Mix Performance at Low Temperature”, International Journal of Cold Regions Science and Technology, volume 136, pages 52-61.
  54. Ng Puga, K.L. and Williams, R.C. “Low temperature performance of Laboratory produced Asphalt Rubber (AR) Mixes Containing Polyoctenamer”, Journal of Construction and Building Materials, volume 112, pages 1046–1053, June, 2016.
  55. Van Winkle, C.; Mokhtari, A.; Lee, H.; Williams, R.C.; and Schram, S. “Laboratory and Field Evaluation of HMA with High Contents of Recycled Asphalt Pavement”, ASCE Journal of Materials in Civil Engineering, 1061/(ASCE)MT.1943-5533.0001720 , 04016196, 9 pages, September, 2016.
  56. Shannon, C.; Mokhtari, A.; Lee, H.; Tang, S. (♦); Williams, R.C.; and Schram, S. “Effects of High Reclaimed Asphalt-Pavement Content on the Binder Grade, Fatigue Performance, Fractionation Process, and Mix Design”, ASCE Journal of Materials in Civil Engineering, 1061/(ASCE)MT.1943-5533.0001694 , 04016218, 9 pages, September, 2016.
  57. Chailleux, É. Bessmann, D. Lo Presti, A. Jimenez del Barco Carrion, L. Porot, T. Pauli, J.-P. Planche, C. Williams, E. Cochran, K. L. Ng-Puga (♦), S. Pouget, F. Olard, P. Hornych. Biorepavation: innovations dans le recyclage des chaussées bitumineuses utilisant des matériaux bio-sourcés. RGRA n° N° 938, juillet-août 2016, p44-46.
  58. Podolsky, J. (); Buss, A.; Williams, R.C.; Hernandez, N.; and Cochran, E.W. “Effects of Aging on Rejuvenated Vacuum Tower Bottom Rheology through use of Black Diagrams, and Master Curves.” International Journal of Fuel, vol. 185, pp. 34-44, 2016.
  59. Chen, C. (♦); Podolsky, J.H. (); Hernandez, N.; Hohmann, A.; Williams, R.C.; and Cochran, E.W. “Use of bioadvantaged materials for use in bituminous modification.” International Journal Transportation Research Procedia, December, 2016.
  60. Tang, S. (♦); Williams, R.C.; and Cascione, A.A. (♦), “Reconsideration of the fatigue tests for evaluating asphalt mixtures and binders containing high percentage reclaimed asphalt pavement materials”, International Journal of Pavement Engineering, volume 18 (5), pages 443-449, 2017.
  61. Podolsky, J. (●); Buss, A.F.; Williams, R.C.; and Cochran, E.W. “Mechanistic Empirical Performance of Warm Mix Asphalt with select Bio-derived Additives in the Midwestern United State using AASHTOWare Pavement ME Design”, Road Materials and Pavement Design, volume 18 (4), pages 800-816, 2017.
  62. Podolsky, J. (); Buss, A.; Hernandez, N.; Williams, R.C.; and Cochran, E.W. “Rejuvenation of Vacuum Tower Bottoms through Bio-derived Materials for Use in Paving Flexible Roadways.” International Journal of Cleaner Production, vol. 143, pp. 1081-1093, 2017.
  63. Mokhtari, A.; Lee, H.D.; Williams, R.C.; Guymon, C.A.; Scholte, J.P.; and Schram, S. “A novel approach to evaluate fracture surfaces of aged and rejuvenator-restored asphalt using cryo-SEM and image analysis techniques,” Journal of Construction and Building Materials, volume 133, pages 301-313, 2017.
  64. Fernandes, S.; Peralta, J.; Oliveira, J.R.M.; Williams, R.C.; and Silva, H.M.R.D. “Improving Asphalt Mixture Performance by Partially Replacing Bitumen with Waste Motor and Elastomer Modifiers”, Applied Sciences, Volume 7(8), 794, 2017.
  65. Rahman, Md. S. (♦); Podolsky, J.H. (●); Williams, R.C.; and Scholz, T. “A Study of Top-Down Cracking in the State of Oregon.” Road Materials and Pavement Design, pages 1-25, 2017.
  66. Elkashef, M. (♦); Podolsky, J.H. (●); Williams, R.C.; and Cochran, E.W. “Preliminary examination of soybean oil derived material as a potential rejuvenator through Superpave criteria and asphalt bitumen rheology”, Journal of Construction and Building Materials, volume 149, pages 826-836, 2017.
  67. Elkashef, M. (♦); Podolsky, J.H. (●); Williams, R.C.; and Cochran, E.W. “Introducing a soybean oil derived material as a potential rejuvenator through examination of asphalt binder rheology, mix master curves, and Fourier Transform Infrared (FTIR) analysis.” Road Materials and Pavement Design, pages 1-21, 2017.
  68. Elkashef, M. (♦); Williams, R.C.; and Cochran, E.” Improving fatigue and low temperature performance of 100% RAP mixtures using a soybean-derived rejuvenator,” Journal of Construction and Building Materials, volume 151, pages 345-352, 2017.
  69. Ahmed, T.A.; and Williams, R.C. “Using a modified asphalt bond strength test to investigate the properties of asphalt binders with polyethylene wax-based warm mix asphalt additive,” International Journal of Pavement Research and Technology, volume 11 (1), pages 28-37, 2018.
  70. Elkashef M. (♦) , Williams R.C., Cochran, E., 2017. “Thermal Stability and Evolved Gas Analysis of Rejuvenated Reclaimed Asphalt Pavement (RAP) Bitumen Using Themogravimetric Analysis-Fourier Transform Infrared (TG-FTIR),” Journal of Thermal Analysis and Calorimetry, volume 131 (2), pages 865-871, 2018.
  71. Chen, C. (♦); Podolsky, J.H. (●); Hernandez, N.B.; Hohmann, A.D.; Williams, R.C.; and Cochran, E.W. “Preliminary investigation of bioadvantaged polymers as sustainable alternatives to petroleum-derived polymers for asphalt modification”, Materials and Structures, in-press, published online, October 2017.
  72. Chen, C. (♦); Lin, S.; Williams, R.C.; and Ashlock, J.A. “In-Situ Modulus Measurement and Performance Evaluation on Asphalt Pavement Reflective Cracking Mitigation Treatments”, Baltic Journal of Road and Bridge Engineering, Volume 13 (1), pages 46-53, 2018.
  73. Chen, C. (♦); Podolsky, J.H. (●); Williams, R.C.; and Cochran, E.W. “Determination of the optimum polystyrene parameters using asphalt binder modified with poly(styrene-acrylated epoxidized soybean oil) through response surface modelling”, International Journal of Road Materials and Pavement Design, published online, pages 1-10, November 24, 2017.
  74. Elkashef M. (♦) , Williams R.C., and Cochran E., “Investigation of Fatigue and Thermal Cracking Behavior of Rejuvenated Reclaimed Asphalt Pavement Binders and Mixtures”, International Journal of Fatigue, volume 108, pages 90-95, 2018.
  75. Podolsky, J.H. (●) ; Williams, R.C., and Cochran, E.W. “Effect of Corn and Soybean Oil derived Additives on Polymer-modified HMA and WMA Master Curve Construction and Dynamic Modulus Performance,” in-press, accepted for publication in the International Journal of Pavement Research and Technology, January 6, 2018.
  76. Elkashef M. (♦); Williams R.C.; and Cochran E.W., “Chemical Characterization of reclaimed asphalt pavement (RAP) binder through pyrolysis gas chromatography-mass spectrometry”, Materials and Structures, volume 51 (1), 12 pages, 2018.
  77. Ghasemi, P. (♦); Aslani, M.; Rollins, D.; Williams, R.C., and Schaefer V.R. “Modeling Rutting Susceptibility of Asphalt Pavement Using Principal Component Pseudo Inputs in Regression and Neural Networks”, in-press, accepted for publication  in the International Journal of Pavement Research and Technology, January 15, 2018.
  78. Sotoodeh Nia, Z. (♦); Hohmann, A.; Buss, A.; Williams, R.C., Cochran, E. “Towards Sustainable Pressure Sensitive Adhesive Production: Rheological and Physical Charaterization of Pressure Sensitive Adhesives from Bio-Derived Block Copolymers”, accepted for publication and in-press in the Journal of Applied Polymer Science, April 2018.
  79. Lin, S.; Ashlock, J.; Williams, R.C.; Lee, H.D.; and Wang, Y. “Evaluation of three non-destructive testing techniques for quality assessment of asphalt pavements”, Non-Destructive Testing and Evaluation, published online, pages 1-15, June 2018.
  80. Chen, C. (♦); Podolsky, J.H. (●); Hernandez, N.; Hohmann, A.; Williams, R.C.; and Cochran, E.W. “Rheological properties and effects of aging on acrylated epoxidized soybean oil (AESO) monomer modified asphalt binder”, accepted for publication and in-press in the International Journal of Road Materials and Pavement Design, June 2018.
Ashley Buss
  1. +Guirguis, M., and Buss, A. 2017. Performance Evaluation of Emulsion and Hot Asphalt Cement Chip Seal Pavements. Journal of Materials in Civil Engineering, 29(11), 04017202.
  2. Podolsky, J. H., Buss, A., Williams, R. C., Hernández, N., and Cochran, E. W. 2017. Rejuvenation of vacuum tower bottoms through bio-derived materials for use in paving flexible roadways. Journal of Cleaner Production, 143, 1081-1093.
  3. Podolsky, J. H., Buss, A., Williams, R. C., and Cochran, E. W. 2017. https://www.sciencedirect.com/science/article/pii/S0165232X17300605. Cold Regions Science and Technology, 136, 52-61.
  4. Podolsky, J. H., Buss, A., Williams, R. C., and Cochran, E. 2017. Mechanistic empirical performance of warm-mix asphalt with select bio-derived additives in the Midwestern United States using AASHTOWare pavement ME design. Road Materials and Pavement Design, 18(4), 800-816.
  5. Stephenson, W.R., Buss, A., and Elkashef, M. Extracting more from Dynamic Modulus Data using Split-Plot Repeated Measures Analysis. Journal of Testing and Evaluation, Vol 46, No. 1, pp. 351-64.
  6. Buss, A., +Mercado, M., and Schram, S. Long-Term Evaluation of Cold-in-Place Recycling and Factors Influencing Performance. ASCE J. Perform. Constr. Facil., November 2016. 10.1061/ (ASCE)CF.1943-5509.0000985, 04016111.
  7. Podolsky, J.; Buss, A.; Williams, R.C.; Hernandez, N.; and Cochran, E.W. Rejuvenation of vacuum tower bottoms through bio-derived materials for use in paving flexible roadways. Journal of Cleaner Production. December 8, 2016.
  8. Podolsky, J.; Buss, A.; Williams, R.C.; Hernandez, N.; and Cochran. E.W. Effects of Aging on Rejuvenated Vacuum Tower Bottom Rheology through use of Black Diagrams, and Master Curves. Journal of Fuel. December 1, 2016. DOI:10.1016/j.fuel.2016.07.094
  9. Podolsky, J.H., A. Buss, R.C. Williams and E. Cochran. Mechanistic empirical performance of warm-mix asphalt with select bio-derived additives in the Midwestern United States using AASHTOWare pavement ME design. Road Materials and Pavement Design, June 13, 2016. ISSN: 1468-0629. DOI: 10.1080/14680629.2016.1194880
  10. Podolsky, J., A. Buss, R. C. Williams, E. Cochran. The Rutting and Stripping Resistance of Warm and Hot Mix Asphalt using Bio-additives. Construction and Building Materials, Volume 102, pp. 358-366. January 15, 2016. DOI:10.1016/j.conbuildmat. 2015.11.010
  11. Buss, A.#, R.C. Williams, and S. Schram. Evaluation of Moisture Susceptibility Tests for Warm Mix Asphalt. Construction and Building Materials, Volume 102, pp. 358-366. January 15, 2016. DOI:10.1016/j.conbuildmat.2015.11.010
  12. Buss, A., J. Podolsky, R.C. Williams, and E. Cochran. Investigation of Isosorbide Distillation Bottoms as a Bio-Based Warm-Mix Additive. ASCE Journal of Materials in Civil Engineering, Vol. 28, No. 3, March 2016. DOI:10.1061/(ASCE)MT.1943-5533.0001445 , 04015153
  13. Chen, C., R.C. Williams, M.G. Marasinghe, J.C. Ashlock, S. Schram, and A. Buss. Assessment of Composite Pavement Performance by Survival Analysis. ASCE Journal of Transportation Engineering, March 12, 2015. DOI: 0.1061/(ASCE)TE.1943-5436.0000784, 04015018
  14. Buss, A.#, R. C. Williams, and S. Schram. The influence of warm mix asphalt on binders in mixes that contain recycled asphalt materials. Construction and Building Materials, Volume 77, pp. 50-58, 15 February 2015. doi:10.1016/j.conbuildmat.2014.12.023.
  15. Podolsky, J., A. Buss, R.C. Williams and E. Cochran. Comparative Performance of Bio-Derived/Chemical Additives in Warm Mix Asphalt at Low Temperature. Materials and Structures, December 2014. DOI 10.1617/s11527-014-0520-3.
  16. Buss, A.#, A. Cascione, and R. C. Williams. Evaluation of Warm Mix Asphalt Containing Recycled Asphalt Shingles. Construction and Building Materials, Volume 61, pp.1-9, June 2014.
  17. Schram, S., R. C. Williams, and A. Buss. Reporting Results from the Hamburg Wheel Tracking Device. Transportation Research Record: Journal of the Transportation Research Board, No. 2446, Transportation Research Board of the National Academies, Washington, D.C., 2014, pp. 89-98. DOI:10.3141/2446-10
  18. Yu, Jianhua; R.C. Williams; A. Buss. Laboratory Evaluation of Warm Mix Asphalt Influence on Theoretical Maximum Specific Gravity. ASTM Journal of Testing and Evaluation, Technical Notes DOI: 10.1520/JTE 103928, March 2012.
  19. Ceylan, H.; K. Gopalakrishnan, S. Kim, P.C. Taylor, M. Prokudin, and A. Buss. 2013. Highway Infrastructure Health Monitoring Using Micro-Electromechanical Sensors and Systems (MEMS). Journal of Civil Engineering and Management, 19(sup1), pp. S188-S201.
TOP